• BeastX Microbeast Plus Pro Edition BXM76400PE

MICROBEAST Plus is a 3-axis control system for flybarless RC model helicopters. MEMS sensors of the latest generation measure the aircrafts rotational movement with unprecedented precision and transmit the data digitally and in real time to the system. The housing made of plastic composite material keeps the weight of MICROBEAST Plus sensationally low.

The sophisticated setup can quickly be done everywhere and no expensive programming box or computer is needed. So many settings can also be changed simply and easily at the flying field.

Further options are available with the optional USB2SYS interface and the StudioX software package. MICROBEAST Plus can be kept up to date by using the update functionality and advanced pilot can thus customize the unit specifically to their needs.

The device can be upgraded to ProEdition firmware with AttitudeControl (Bail out rescue function) at any time (subject to a charge).

Pro Edition Includes:


The AttitudeControl feature overs different modes for self leveling and stabilizing the helicopter automatically. You can choose between "Bailout rescue mode", "3D-Mode" and "Angular mode" which will make your heli fly like a quad. Basically when you activate the AttitudeControl in flight it will turn your helicopter back to level position when you release the sticks. There are even more options like pitch input control and locking mechanisms to prevent the pilot from adding wrong stick input. AttitudeControl will turn MICROBEAST/MICROBEAST PLUS into a perfect training partner and helping hand to train flying, learn new maneuvers or simply give a good feel of having a backup!

Bank Switching

With Bank Switching you can change between 3 different parameter sets in flight, instead of using only one fixed parameter set. This allows to adapt the system to different flight conditions or different rotorhead speeds, i.e. when hovering, cruising, speed flying, landing and so on. Or you can use the Bank Switching to selectively change specific parameters, i.e. switch between different rescue modes or test the effects of a parameter. Please note that due to the variety of setup options it is only possible to enable and setup the bank switching with the StudioX computer software or StudioXm App for mobile devices.

Product Information

3 swash plate servos

 Maximum adjustable servo update rate: 200Hz

 Swash plate mixing types: mCCPM, 90°, 120°, 135°, 140°; as well es freely configurable mixer with StudioX, i.e. for swash phasing

1 rudder servo - Supports mostly all types of servos with 1520µs, 960µs or 760µs

Maximum adjustable servo update rate: 560Hz

When using a SingleLine receiver additionally: throttle output, auxiliary output for landing gear, position lights or else

Signal Inputs

Standard receiver with single servo output channels

SingleLine receivers: Spektrum DSM2/DSMX remote satellite, JR RJ01 DMSS remote satellite, Futaba S.Bus, SRXL (JR XBUS, Spektrum SRXL, SUMD, M-Link, BEASTX SRXL, JETI UDI), SPPM

Sensor board (i. e. for connecting a rpm sensor for internal electric or nitro RPM governor function).



Receiver connection cables x 3

3M adhesive pads x 2

Adjustment tool x 1

Quick start manual poster x 1

Plastic quick reference card x  1

Sticker set x 1

Input voltage: 3,5 V - 8,5 V DC (Operation with 2 cell LiPo possible)

Processor: 32 Bit ARM

Sensor: 6-Axis MEMS (Gyro + Accelerometer)

Dimensions: 36 x 25 x 14 mm

Weight (w/o wiring): ca. 11g

Write a review

Please login or register to review

BeastX Microbeast Plus Pro Edition BXM76400PE

  • Brand Beastx
  • Product Code: 02-BXM76400PE
  • Availability: Out Of Stock
  • $269.99

Related Products

Tags: Beastx

Powered by Our Customers AlignTrexShop © 2021