• T-REX 470LP Dominator Kit Belt RH47E03X by Align

Click the tab above "Specifications" to list details and included items or "Competitive Comparison" to list the difference between 470LP Kit Belt and 470LM Kit Belt RH47E06X

Align T-Rex 470LP Kit Belt.

Following the release of the T-REX 450L, which introduced an innovative design and came equipped with high-end electronic equipment. ALIGN's most anticipated helicopter release in 2016 the T-REX 470L is born. No matter whether you are a newcomer or a professional, the brand new T-REX 470L will give you the new flying feel again.

The 470EFL Main Rotor Head provides superior flight stability and offers a lower CG design to reduce flying resistance while providing a more rigid and fast rotor head response. To improve the strength and durability of the main and feathering shaft the 470 main shaft outer dimension was increased from 5mm to 6mm, while the feathering shaft outer dimension was increased from 4mm to 5mm. The ALIGN 470LP adopts a high standard 1.2mm 3K carbon fiber main frame and a wider body design which increases the size of the battery compartment allowing the use of larger capacity battery. The T-REX 470LP utilizes a high efficient belt drive assembly design with an innovative adjustable belt guide pulley, providing a convenient way to adjust the belt tension by releasing or tightening the screw. This screw is used to maintain optimal belt tension improving the life of the belt and lowering maintains costs. The landing skid is tilted 5 degrees forward to improve crashworthiness and makes TREX 470LP more avant-garde and dynamic.

The ALIGN T-REX 470LP Kit Belt RH47E03 is equipped with the large outer diameter 470MX motor (1800KV) which is highly efficient providing superior power, excellent torque, improved current draw, and a lower operating temperature which are excellent improvements as compared to the 460MX motor. The new high-end electronics effectively enhance flight performance.

RH47E03XW

Extended 380mm main blades effectively improve the flying stability and power performance. The new engineered airfoil design effectively reduces turbulence at the end of the main blades,this saves power consumption during extreme 3D flight. New 69mm size tail blades are longer in length and offer superior tail holding performance, even during demanding 3D flight.

RH47E03XW

Brand New 470EFL Main Rotor Head provides superior flight stability and offers a lower CG design to reduce flying resistance while providing a more rigid and fast rotor head response. Brand New 470 Main Shaft and Feathering Shaft: Main Shaft outer dimension increased from 5mm to 6mm, while the Feathering Shaft outer dimension increased from 4mm to 5mm,effectively strengthening the Main and Feathering Shaft while improving durability.

 
RH47E03XW

New 470MX motor features; high efficiency, superior power, excellent torque, low current draw, and a low operating temperature. The 470MX is capable of maintaining consistent torque and head speed through continuous 3D maneuvers. 470MX motor is designed for 3D flight.

RH47E03XW

New Swashplate design with zero slop delivering a precise and accurate controlled flight.

 
RH47E03XW

Manufactured using the latest composite technology to embed brass inserts into main shaft bearing block, which enhance the structure integrety and strength. You can feel the solid structure even in extreme 3D flight.

RH47E03XW

Carbon fiber side frame plates are manufactured using a proprietary composite material integration technology which integrates the battery mounting rails into the frame. This unique use of open spaces within the frame creates a rigid frame and is aesthetically pleasing.

 
RH47E03XW

An additional 3rd main shaft bearing block increases the strength of the main frame while improving 3D flight.

RH47E03XW

Brand new latching battery tray which utilizes integrated mounting rails inside the frames to simplify insertion / removal of battery while providing protection for the battery.

 
RH47E03XW

Specially designed for T-REX 470 providing higher currency output and support for high voltage servos with an internal BEC output from 5V to 8.4V which can be set up based on servo specification.

RH47E03XW

Innovative adjustable belt guide pulley, allows a convenient way to adjust the belt tension by releasing or tightening the screw. The screw is used to maintain optimal belt tension over time.

 
RH47E03XW

Brand New Belt Drive Assembly design allow for quiet operation and low cost on serviceability.

RH47E03XW

The One Way Bearing is manufactured using bearing steal and after heat treatment the hardness is HRC50-55. This larger bearing has a higher load carry capacity which reduces the loss of momentum and improves the efficiency, speed, and smoothness of the main rotor.

 
RH47E03XW

Landing skid is tilted 5 degrees forward to improve crashworthiness.

RH47E03XW

Newly designed vertical tail servo mount to improve CG while increasing the responsiveness of 3D flight.

 
RH47E03XW

A wider Tail Boom to improves the torsional strength.

RH47E03XW

Designed using a proprietary material integration technology which creates a unique look and improves the Vertical Stabilizer's stiffness.

 
RH47E03XW

The newly designed dual point supported tail control assembly delivers slop free performance while improving rudder resolution and precision.

RH47E03XW

The new tail rotor holder design includes thrust bearings which increases durability, as well as significantly improving the accuracy and efficiency of the tail performance when using 69mm size Tail Blades.

Standard Equipment

T-REX 470LP DOMINATOR Kit x 1

RCE-BL50X 50A Brushless ESC x 1

470MX Brushless Motor (1800KV/2818) x 1

380mm Carbon Fiber Main Blades x 1 set

69mm Tail Blades x 1 set

T-REX 470L Specification

Length: 755mm

Height: 210mm

Width: 108mm

Main Blade Length: 380mm

Main Rotor Diameter: 850mm

Tail Rotor Diameter: 181mm

Motor Pinion Gear: 11T

Main Drive Gear: 121T

Main Drive Pulley: 56T

Tail Drive Gear: 15T

Drive Gear Ratio: 11:1:3.73

Weight (without battery): 840g

Equipment Required for Assembly

Transmitter (6-channel or more, helicopter system)

Digital Cyclic Servos x 3

Digital Tail Servo x 1

Flybarless System - Recommend Microbeast Plus

Receiver S.bus, DMSX/DMS2 , Standard Receiver (6-channel or more)

6S1P 22.2V 1400mAh - 1900mAh Battery x 1

Digital Pitch Gauge

Misc. Building Equipment

 

 

 

 

 

Standard Equipment

T-REX 470LP DOMINATOR Kit x 1

RCE-BL50X 50A Brushless ESC x 1

470MX Brushless Motor (1800KV/2818) x 1

380mm Carbon Fiber Main Blades x 1 set

69mm Tail Blades x 1 set

T-REX 470L Specification

Length: 755mm

Height: 210mm

Width: 108mm

Main Blade Length: 380mm

Main Rotor Diameter: 850mm

Tail Rotor Diameter: 181mm

Motor Pinion Gear: 11T

Main Drive Gear: 121T

Main Drive Pulley: 56T

Tail Drive Gear: 15T

Drive Gear Ratio: 11:1:3.73

Weight (without battery): 840g

Equipment Required for Assembly

Transmitter (6-channel or more, helicopter system)

Digital Cyclic Servos x 3

Digital Tail Servo x 1

Flybarless System - Recommend Microbeast Plus

Receiver S.bus, DMSX/DMS2 , Standard Receiver (6-channel or more)

6S1P 22.2V 1400mAh - 1900mAh Battery x 1

Digital Pitch Gauge

Misc. Building Equipment

 

 

Standard Equipment
Kit 470LP Kit Belt
Model RH47E03X
Main Blades Align 380mm Carbon Fiber Main Blades
Tail Blades Align 69mm Tail Blades
Electronics Included
ESC Align RCE-BL50X 50A Brushless ESC
ESC Programing Transmitter Throttle Stick
Motor Align 470MX Brushless Motor (1800KV/2818)
Specification
Assembly Required Yes
Length 755mm - 29.72in
Height 210mm - 8.27in
Width 108mm - 4.25in
Main Blade Length 380mm - 18.50in
Main Rotor Diameter 850mm - 33.46in
Tail Blade Length 69mm - 2.72in
Tail Rotor Diameter 181mm - 7.13in
Motor Pinion Gear 11T
Main Drive Gear 121T
Main Drive Pulley 56T
Tail Drive Gear 15T
Tail Drive System Belt
Drive Gear Ratio 11:1:3.73
Max RPM (approx.) 3298 rpm
Weight (Without Battery) 840g - 29.63oz
Battery Size 6S Li-Po 1400 ~ 1850mAh
T-REX 470LP Kit Belt

T-REX 470LP Kit Belt

T-REX 470LM Super Combo Belt

T-REX 470LM Super Combo Belt

T-REX 470LM Kit Belt

T-REX 470LM Kit Belt

Price $250.99 $213.99 $623.99 $529.99 $315.99 $269.99
Rating
General
Kit 470LP Kit Belt 470LM Super Combo Belt 470LM Kit Belt
Model RH47E03X RH47E01X RH47E06X
Specification
Main Blades Align 380mm Carbon Fiber Main Blades Align 380mm Carbon Fiber Main Blades Align 380mm Carbon Fiber Main Blades
Tail Blades Align 69mm Tail Blades Align 69mm Tail Blades Align 69mm Tail Blades
ESC Align RCE-BL50X 50A Brushless ESC Align RCE-BL50X 50A Brushless ESC Align RCE-BL50X 50A Brushless ESC
ESC Programing Transmitter Throttle Stick Transmitter Throttle Stick Transmitter Throttle Stick
Motor Align 470MX Brushless Motor (1800KV/2818) Align 470MX Brushless Motor (1800KV/2818) Align 470MX Brushless Motor (1800KV/2818)
Assembly Required
Length 755mm - 29.72in 755mm - 29.72in 755mm - 29.72in
Height 210mm - 8.27in 210mm - 8.27in 210mm - 8.27in
Width 108mm - 4.25in 108mm - 4.25in 108mm - 4.25in
Main Blade Length 380mm - 18.50in 380mm - 18.50in 380mm - 18.50in
Tail Blade Length 69mm - 2.72in 69mm - 2.72in 69mm - 2.72in
Cyclic Servo Align DS450M Digital Servo x 3
Tail Servo Align DS455M Digital Servo
Servo Gears Metal
Servo Case All Metal
Flybarless System Microbeast Plus by Beastx

Write a review

Please login or register to review

T-REX 470LP Dominator Kit Belt RH47E03X by Align

  • Brand ALIGN
  • Product Code: 01-RH47E03X
  • Availability: Out Of Stock
  • $250.99
  • $213.99

Related Products

ALIGN Li-Po Battery 6S 2200mAh 45C
The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.
Email

Powered by Our Customers AlignTrexShop © 2021