TREX 300X Dominator Ready to Fly RTF. Charge and Fly.

Align newly designed T-REX 300X, small but all-in-perfect. It adopts DFC rotor head unit, low CG and low wind resistance providing direct flight responses. The carbon fiber main frame is made of composite material and with reinforcement plate and brace assembly effectively enhancing structural intensity and torsion resistance. Narrow body design makes mechanical structure much stronger. The battery slider and top-mounted motor design with anodized bright red color brings pretty texture on this model. Thicken aluminum alloy tail boom for the best torsion resistance and increase the tail support rod lifetime. The progressive lightweight landing skid making this model the leader in this class. Plus the fiberglass painted canopy features lightweight and low in wind resistance.

The standard high torque and high efficiency 300MX 3700KV/2216 brushless motor not only contributes to dramatic power increase, the high efficiency cooling system enables cooler operating temperature during and after flights when compared to motor of previous generation. Allow to provide consistent power output and keep stable RPM in non-stop 3D flying presenting perfect performance. Also it pairs with digital HV DS450 and DS455 servos, supporting 8.4V output, fast response and high torque. The new 25A brushless speed governor support 5~8.4V adjustable BEC voltage.

T-REX 300X is tiny but everything all-in-one so that can perform well in not only in-door show but also outdoor 3D flights. This model offers you the best bargain price allow you to have fun flying at any time.

Standard Equipment

T-REX 300X DOMINATOR Kits Set

MiniGRS Flybarless System

230 Carbon Fiber Main Blades

50 Tail Blade

RCE-BL25A 25 Brushless ESC

300MX Brushless Motor (3700KV/2216)

DS450 Digital Servo x 3

DS455 Digital Servo

A10 Radio Control System Combo

MiniA.BUS Receiver

Balance Charger RCC-3SX

3S1P 11.1V 1300mAh/30C x 1

 

T-REX 300X Specification

Length: 476mm

Height: 158mm

Width: 88mm

Main Blade Length: 230mm

Main Rotor Diameter: 525mm

Tail Rotor Diameter: 143mm

Motor Pinion Gear: 14T

Main Drive Gear: 115T

Main Drive Pulley: 40T

Tail Drive Gear: 13T

Drive Gear Ratio: 8.21:1:3.08

Weight (without battery): 418g

 

MiniA.BUS Receiver Specification

Channel: 14 channels

RX Sensitivity: -105dBm

RF Range: 2.4055 ~ 2.475 GHz

System Mode: 2.4G system AFHDS 2A

Power: 4.0 ~ 8.4V DC

Transmit Distance: In open space without interference <150M

 

MiniGRS Flybarless System Specification

Operating voltage range: DC 3.5~8.4V

Operating current consumption: <100mA @ 4.8V

Rotational detection rate: ±300°/sec

Rudder yaw detection rate: ±600°/sec

Sensor resolution: 12 BIT

Swashplate Support: 120° CCPM Swashplate

Mode Support: T-REX250, T-REX300, T-REX450, T-REX470, T-REX500

Receiver Support: ALIGN A10(A.BUS), Futaba S-FHSS, DSM2/DSMX

Operating temperature: -20? ~ 65?

Operating humidity: 0% ~ 95%

Comply with RoHS

Size: 37.6mm x 22.4mm x 13mm

 

A10 Specification

Channel: 10-Channel

Available Models: helicopter/airplane/multicopter

Frequency range: 2.408 ~ 2.475 GHz

Power: no higher than 20dBm(For EU)

System Mode: 2.4G system AFHDS 2A

Suitable Voltage Range: 4.0 ~ 6.0V DC

Receiving Distance: the open ground no interference < 1000M

Low Voltage Warning: Lower than 4.2V

Weight: 485g (excluded battery)

Size: 275x187x102mm

Balance Charger RCC-3SX Specification

Input Voltage: AC 100V~240V(50/60Hz)

Output Voltage: 2cell DC 7.4V / 3cell DC 11.1V

Supported Battery Type: Li-polymer / Li-ion

Charging Method: CC/CV

Charging Current: 2A

Size: 123x74.3x32mm

Weight: 260g

Battery Specification

Output: 11.1V 1300mAh 14.4Wh(3S1P)

Supports 5C charging

Dimension: 74x36.5x21mm?Weight: 115g

14AWG heat-resistant silicone rubber wire. Heat resistance: 200 ° C / Current withstand: 50A

Equipment Required for Assembly

Digital Pitch Gauge

Swashplate Leveler

 

Standard Equipment
Kit T-REX 300X Dominator Kit
Main Blades Align 230mm Carbon Fiber Main Blades
Tail Blades Align 50mm Tail Blades
Battery Align 3S1P 11.1V 1300mAh 30C - XT30
Battery Charger Align RCC-3SX Balance Charger
Spare Parts Box Small Parts - Tweezers - Plastic Screwdriver - Bind Plug
Electronics Included
ESC Align RCE-BL25A 25 Brushless ESC
ESC Programing Align ASBOX Multifunction Programmer HES00001
Motor Align 300MX Brushless Motor (3700KV/2216)
Cyclic Servo Align DS450 Digital Servo x 3
Tail Servo Align DS455 Digital Servo
Servo Gears Metal
Servo Case Metal - Plastic
Flybarless System MiniGRS Flybarless System
Flybarless Programming Dials on MiniGRS & Transmitter
Stabilization Level Mode No
Rescue Mode No
Receiver Built In MiniA.BUS Receiver Included, Futaba - FHSS
Receiver Supported DSMX (Recommend Kensun Satellite)
A10 Specification
Channel 10-Channel
Model Memory 20 Different Models
Available Models Helicopter - Airplane - Multicopter
Frequency Range 2.4055 ~ 2.475 GHz
Power No Higher Than 20dBm
System Mode 2.4G System AFHDS 2A
Input voltage 4.0 ~ 6.0V DC
Receiving Distance Direct Line of Site <1000M
Low Voltage Warning Lower than 4.2V
Size 275x187x102mm - 10.83x7.36x4.02in
Weight 485g - 17.11oz (excludes battery)
Specification
Length 476mm - 18.74in
Height 158mm - 6.22in
Width 88mm - 3.46in
Main Blade Length 230mm - 9.06in
Main Rotor Diameter 525mm - 20.67in
Tail Blade Length 50mm - 1.97in
Tail Rotor Diameter 143mm - 5.63in
Motor Pinion Gear 14T
Main Drive Gear 115T
Main Drive Pulley 40T
Tail Drive Gear 13T
Tail Drive System Belt
Drive Gear Ratio 8.21:1:3.08
Weight (Without Battery) 418g - 14.74oz

Write a review

Please login or register to review

T-REX 300X Dominator Super Combo with A10 Ready to Fly RTF RH30E01X

  • Brand Align
  • Product Code: 01-RH30E01X
  • Availability: In Stock
  • $582.99
  • $499.99


Powered by Our Customers AlignTrexShop © 2021