TREX 450L Dominator Almost Ready to Fly ARTF includes A10 2.4GHz Transmitter.

Align T-REX 450 has been the ideal choice for entry level R/C helicopters. To cater to new RC helicopter enthusiasts, Align introduced T-REX 450LP Almost Ready to FlyARTF (Almost Ready to Fly)*, complete with newly released Align A10 transmitter and Mini GRS flybarless system. This combination allows new enthusiasts  to spend more time flying, rather than countless hours of guess work and building.

The helicopter utilizes DFC (Direct Flight Control) rotor head, paired with Mini GRS flybarless system optimized for T-REX 450LP flight characteristics. It provides excellent stability suitable for pilots of all levees.

Equipped with digital high voltage servo DS450 and DS455, supports 8.4 high voltage to provide optimal speed and torque performance. Paired with the new RCE-BL45P ESC, supports adjustable 5~8.4V BEC function to highly improve flight performance.

ALIGN A10 is AFHDS (Automatic Frequency Hopping Digital System) 2.4GHz transmitter provided with 10 channels. The stick and holder are designed based on ergonomic bringing much smoother control. Completed function with the mode of helicopter / aircraft / multicopter. Logical and simple control interface, and easy to set up.

With the addition of the brand new Align A10 transmitter and Mini GRS, the T-REX 450LP ARTF pushes past the performance limitation of flybar helicopter, improving both on stability and 3D performance, while maintaining a down to earth price level.

MINIGRS Specification

Operating voltage range: DC 3.5~8.4V

Operating current consumption: <100mA @ 4.8V

Rotational detection rate: ±300°/sec

Rudder yaw detection rate: ±600°/sec

Sensor resolution: 12 BIT

Swashplate Support: 120° CCPM Swashplate

Mode Support: T-REX250, T-REX450, T-REX470, T-REX500

Receiver Support: ALIGN A10(A.BUS), Futaba S-FHSS, DSM2/DSMX

Operating temperature: -20? ~ 65?

Operating humidity: 0% ~ 95%

Comply with RoHS

Size: 37.6mm x 22.4mm x 13mm

*User is required to install tail assembly to the body of the helicopter and reconfirm set-up before flight.

 

Equipment Required for Assembly

Transmitter (6-channel or more, helicopter system)

Receiver S.bus, DMSX/DMS2 , Receiver (6-channel or more)

3S1P 11.1V 1300mAh 30C

Digital Pitch Gauge

Swashplate Leveler

Misc. Building Equipment

Standard Equipment
Kit T-REX 450LP Dominator Kit
Main Blades Align 325mm Carbon Fiber Main Blades
Tail Blades Align 65mm Tail Blades
Battery Align 3S1P 11.1V 2250mAh 50C - Deans
Battery Charger Align RCC-3SX Balance Charger
Electronics Included
ESC Align RCE-BL45P ESC
ESC Programing Transmitter Throttle Stick
Motor Align 460MX Brushless Motor (3200KV/2222)
Cyclic Servo Align DS450 Digital Servo x 3
Tail Servo Align DS455 Digital Servo
Servo Gears Metal
Servo Case Metal - Plastic
Flybarless System MiniGRS Flybarless System
Flybarless Programming Dials on MiniGRS & Transmitter
Stabilization Level Mode No
Rescue Mode No
Receiver Built In MiniA.BUS Receiver Included, Futaba - FHSS
Receiver Supported DSMX (Recommend Kensun Satellite)
A10 Specification
Channel 10-Channel
Model Memory 20 Different Models
Available Models Helicopter - Airplane - Multicopter
Frequency Range 2.4055 ~ 2.475 GHz
Power No Higher Than 20dBm
System Mode 2.4G System AFHDS 2A
Input voltage 4.0 ~ 6.0V DC
Receiving Distance Direct Line of Site <1000M
Low Voltage Warning Lower than 4.2V
Size 275x187x102mm - 10.83x7.36x4.02in
Weight 485g - 17.11oz (excludes battery)
Specification
Assembly Required Minor - Install Tail Boom
Length 705mm - 27.56in
Height 205mm - 8.07in
Width 110mm - 4.33in
Main Blade Length 325mm - 12.80in
Main Rotor Diameter 734mm - 28.90in
Tail Blade Length 65mm - 2.56in
Tail Rotor Diameter 171mm - 6.73in
Motor Input Voltage 3S
Motor Pinion Gear 11T
Main Drive Gear 121T
Autorotation Driver Gear 106T
Tail Drive Gear 26T
Tail Drive System Torque Tube
Drive Gear Ratio 11:1:4.07
Weight (Without Battery) 730g - 25.75oz

Write a review

Please login or register to review

T-REX 450LP Dominator Almost Ready to Fly ARTF with A10 RH45E32X

  • Brand Align
  • Product Code: 01-RH45E32X
  • Availability: In Stock
  • $647.99
  • $551.99



Powered by Our Customers AlignTrexShop © 2021