The MICROBEAST ULTRA is the quintessence of more than 10 years of development and realization of stabilization systems for RC helicopters. It combines all the properties of the previously released BEASTX systems and is armed for the future with a modern ARM Cortex MPU with even more computing power and storage capacity.

New MEMS sensors in the latest generation the Microbeast ULTRA measure the aircraft's rotational movement with unprecedented precision and tranit the data digitally in real time to the control system. these new sensors are insensitive to typical vibrations of the helicopter.

The MICROBEAST ULTRA is a control unit for RC model helicopters. The helicopter is largely stabilized by the integrated gyro elements, so that it only follows the pilot's control commands. Almost all remote control systems on the market are supported and, thanks to the update option, newly released systems can also be continuously installed.

The system can be expanded to include additional useful functions via paid upgrades. A telemetry connection is available in which the MICROBEAST ULTRA acts as an interface between the various sensor systems and remote control standards. With the Attitude Control we offer additional position stabilization and rescue of the model for flight training and beginner training. Bank switching allows the system to be optimally adapted to the requirements of the pilot via various parameter sets that can be called up during flight.

The system can be configured using the extensive StudioX app, which is available for almost all platforms (requires additional USB or Bluetooth interface). If you like it very "old school", you can also do without a smartphone and interface. As with the first MICROBEAST, most functions can be set up with a button on the device and with the remote control using the LEDs.

The device can be upgraded to ProEdition firmware with AttitudeControl (Bail out rescue function) at any time (subject to a charge).

Product Information

Servo Center Pulses:

Swashplate: 1520µs Rudder: 1520µs, 960µs, 760µs

Servo Pulse Rates:

Swashplate: 50 - 200Hz Rudder: 50 - 560Hz

Swashplate Mixing:

mCCPM, eCCPM: 90, 120, 135, 140

Swash Phasing (by using StudioX)

Input Signals:

Single Channels

PPM serial pulse

SRXL / SRXL2 (JR XBus, SUMD, M-Link...)

Futaba S.Bus/S.Bus2

Spektrum Remote Receiver* (DSM2/DSMX)

* with Spektrum Remote Receiver adapter

Microbeast Plus/2 v5.2 Quick Start Manual Download

Specifications

Input voltage: 3,5 V - 8,5 V DC (Operation with 2 cell LiPo possible)

Processor: 32 Bit ARM

Sensor: 6-Axis MEMS (Gyro + Accelerometer)

Dimensions: 36 x 25 x 21mm Weight (w/o wiring):19g

Package Includes

MICROBEAST Ultra x 1

Receiver Connection Cables x 3

SRXL2 Adapter Cable x 1

Telemetry Adapter Cable x 1

3M Adhesive Pad x 1

Adjustment Tool x 1

Quick Start Guide x 1

Sticker Set x 1

Write a review

Please login or register to review

BeastX Microbeast Ultra Flybarless Gyro BXM76542

  • Brand Beastx
  • Product Code: 02-BXM76542
  • Availability: Back Order
  • $189.99


Available Options


Related Products

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.
Email

Powered by Our Customers AlignTrexShop © 2021