The MICROBEAST ULTRA is the quintessence of more than 10 years of development and realization of stabilization systems for RC helicopters. It combines all the properties of the previously released BEASTX systems and is armed for the future with a modern ARM Cortex MPU with even more computing power and storage capacity.
What can the MICROBEAST ULTRA The MICROBEAST ULTRA is a control unit for RC model helicopters. The helicopter is largely stabilized by the integrated gyro elements, so that it only follows the pilot's control commands. Almost all remote control systems on the market are supported and, thanks to the update option, newly released systems can also be continuously installed.
The PRO version expands to include additional useful functions. A telemetry connection is available in which the MICROBEAST ULTRA acts as an interface between the various sensor systems and remote control standards. With the AttitudeControl we offer additional position stabilization and rescue of the model for flight training and beginner training. Bank switching allows the system to be optimally adapted to the requirements of the pilot via various parameter sets that can be called up during flight.
The system can be configured using the extensive StudioX app, which is available for almost all platforms (requires additional USB or Bluetooth interface). If you like it very "old school", you can also do without a smartphone and interface. As with the first MICROBEAST, most functions can be set up with a button on the device and with the remote control using the LEDs.
3 swash plate servos
Swash plate mixing types: mCCPM, 90°, 120°, 135°, 140°; as well es freely configurable mixer with StudioX, i.e. for swash phasing
Rudder Servo Supports most types of servos with 1520µs, 960µs or 760µs
Maximum Adjustable Servo Update Rate: 560Hz
When using a SingleLine receiver additionally: throttle output, auxiliary output for landing gear, position lights or else
Standard receiver with single servo output channels
SingleLine receivers: Spektrum DSM2/DSMX remote satellite, JR RJ01 DMSS remote satellite, Futaba S.Bus, SRXL (JR XBUS, Spektrum SRXL, SUMD, M-Link, BEASTX SRXL, JETI UDI), SPPM
Sensor board (i. e. for connecting a rpm sensor for internal electric or nitro RPM governor function).
Microbeast Plus/2 v5.2 Quick Start Manual Download
Input voltage: 3,5 V - 8,5 V DC (Operation with 2 cell LiPo possible)
Processor: 32 Bit ARM
Sensor: 6-Axis MEMS (Gyro + Accelerometer)
Dimensions: 36 x 25 x 14 mm
Weight (w/o wiring): 11g approx
MICROBEAST Ultra Pro x 1
Receiver Connection Cables x 3
SRXL2 Adapter Cable x 1
Telemetry Adapter Cable x 1
3M Adhesive Pad x 1
Adjustment Tool x 1
Quick Start Guide x 1
Sticker Set x 1