The NANOBEAST is a control unit for small and smallest RC model helicopters without auxiliary rotor level. The integrated gyroscopic elements stabilize the helicopter as much as possible so that it follows only the control commands of the pilot. The steering feel can be adjusted from tame to extremely agile. Thus, the model meets almost all requirements of pilots, no matter if beginner or 3D professional. Through a paid firmware upgrade, the system can be extended to "ProEdition".
This offers additional functions such as the AttitudeControl for position stabilization and rescue of the model in unsafe attitude, as well as a bank switching, which allows to switch between different parameter sets in flight. For basic setting and tuning of the system a computer (Windows / mac), a smartphone or tablet (iOS / Android) with Bluetooth LE is required.
Depending on the technology used, you will still need a USB2SYS (for computer) or BLE2SYS (for smartphone / tablet) interface. This is not included and must be purchased separately! The configuration then takes place via the StudioX software, which is offered for free download.
For 180 to 250 Class RC Helicopters
3 swash plate servos
Maximum adjustable servo update rate: 200Hz
Swash plate mixing types: mCCPM, 90°, 120°, 135°, 140°; as well es freely configurable mixer with StudioX, i.e. for swash phasing
1 rudder servo - Supports mostly all types of servos with 1520µs, 960µs or 760µs
Maximum adjustable servo update rate: 560Hz
When using a SingleLine receiver additionally: throttle output, auxiliary output for landing gear, position lights or else
Receiver connections: Spektrum® / JR® single satellite, sum signal connector for Graupner® HOTT, Futaba® SBus, Jeti® exBus, FlySky® iBus, FrSky® SRXL
Multiplex® SRXL, JR® XBus (B), Spectrum® SRXL, Align® iBus, SPPM total signal
Input voltage: 4.8V to 6.0V
NANOBEAST x 1
Receiver connection cables x 3
3M adhesive pads x 2
Adjustment tool x 1
Quick start manual poster x 1
Plastic quick reference card x 1
Sticker set x 1
- Brand: Beastx
- Product Code: 02-BXM76900
- Availability: In Stock
- SKU: BXM76900