ALIGN 2200mAh Li-Po Battery.

Product Information

For T-REX TB40, 470LP, 470L, 470LT Series or Similar RC Helicopter

High Efficient and Discharge

Inspection Machine to Match Cells

Recommend Discharge of the Battery within 80% of Rated Discharge

95% Capacity Over First 100 Cycles

90% Capacity Over Next 150 Cycles

Compatible RC Helicopter Models

470LT Super Combo Torque Tube - RH47E09X

470LM Super Combo Belt - RH47E01X

470LM Kit Belt - RH47E06X

470LP Super Combo Belt - RH47E02X

470LP Kit Belt - RH47E03X

TB40 Top Combo - RH40E01XW

TB40 Kit - RH40E06XW

*Cycle life and efficiency is reduced by over-discharge and high temperature

Specification

Output: 22.2V 2200mAh 48.8Wh (6S1P)

Max Continuous Current: 70A

Charging Support: 5C

Wire: 14AWG, Thermal Resistance: 200°C

Connector: Amass XT60-F

Dimension: 107x34x50mm

Weight: 350g

Package Includes

Li-Po Battery 6S 2200mAh 45C x 1

NOTE:

When using high energy Li-poly Battery, please do not over-discharge, over-charge batteries, or result over-high temperature. Discharging capacity can’t exceed 80% of the max capacity after full charging to ensure a good cycle performance.Recommend to full charge a brand new battery before using and only discharge the battery 50% for first 5 times to make a good efficiency of the battery. Please make it a habit to always count time for flight, or please set a low voltage protection on ESC (Cell voltage after stopping using can not lower than 3.4V). Do not use the battery at insufficient of voltage.

Do not expose batteries to sunshine or store/ charge batteries at the temperature up to 35℃ in a airtight car. The environment high temperature could cause the damage or the danger of burst. If the battery becomes hot while high current discharging or flying, please do not charge the battery immediately. Wait to cool down(about 20 mins), then inspect to recharge. If against follow the original factory using rules, possibly cause the battery to inflate or any dangerous accident happens.

Do not leave the charger is operating unattended as it may cause a fire. Charging error could result in battery explosion, fire, and other unexpected danger or property loss. Please always charge batteries with equipment in sight, do not leave charger unattended. Should you need to leave the charging area, please remove the battery and abort charging process.